Equipment/Tektronix TAS485 Oscilloscope

From York Hackspace
Jump to: navigation, search
4-Channel Analogue Oscilloscope
Tektronix TAS485.jpg
Model Tektronix TAS485
Sub-category Electronics
Status Unknown
Accessories x1/x10 probes
Owner Unknown
Origin Unknown
Last updated 20 January 2018 23:04:41
Last updated by Choffee

Specifications

Offical Spec: https://www.tek.com/datasheet/tas465-tas475-tas485-analog-oscilloscopes

Ranges

Bandwidth - 200 MHz Main Sweep Range - 0.5 s/div to 20 ns

General

  • Four Channels
  • 200MHz minimum bandwidth
  • On-screen cursor measurement ability
  • Power supply: 240V C13

Spec

Bandwidth - 100 MHz (TAS465, TAS475), 200 MHz (TAS485)

Input Channels - 2 (TAS465), 4 (TAS475, TAS485)

Rise Time - ≤3.5 ns (TAS465, TAS475), ≤1.8 ns (TAS485)

Time Base - Dual

Main Sweep Range - 0.5 s/div to 20 ns

Delayed Sweep Range - 5 ms/div to 20 ns

Vertical Accuracy - ±2.5%

Vertical Sensitivity - 2 mV/div to 5 V/div

Horizontal Accuracy - ±2%

X10 Horizontal Accuracy - ±3%

Sweep Speed (X10 mag.), Main - 2 ns/div (TAS465, TAS475), 1 ns/div (TAS485)

Sweep Speed (X10 mag.), Delayed - 2 ns/div (TAS465, TAS475), 1 ns/div (TAS485)

Trigger Modes - AUTO LEVEL, AUTO, NORMAL, TV LINE, TV FIELD (odd, even, or both), SGL SEQ

Trigger Delay - RUNS AFTER DELAY, TRIGGERS AFTER DELAY, TV LINE (from MAIN source)

Trigger Coupling (both Main and Delayed) - AC, DC, Noise Reject, HF Reject, LF Reject

Auto Setup - Yes

Store/Recall - 4 front­panel setups

Cursors and Readouts - Yes

CRT - 14 kV

Warranty - Three years

Safety Certification - UL, CSA, IEC348